Pentair | 011067 | IntelliFlo3 VSF 1.5HP Pump with Touchscreen
Couldn't load pickup availability
The Pentair 011067 IntelliFlo3 VSF 1.5 HP with Touchscreen pairs the standard 1.5 HP IntelliFlo3 pump with a factory-fitted touchscreen interface. It does not include the I/O relay board, which is what separates it from the 011068. Sensorless flow control holds your target flow rate rather than a fixed speed.
Key Features
- Touchscreen fitted from the factory for control at the equipment pad
- Sensorless flow control maintains optimum flow automatically
- Up to 90% energy savings versus a single-speed pump
- WEF 9.4, DOE compliant, Energy Star approved
- WiFi and Bluetooth for the Pentair Home app
- Dual voltage: 115V or 208-230V
- Upper and lower union kit provided, bonding lug included
Specifications
- Brand: Pentair
- Part Number: 011067
- Model: IntelliFlo3 VSF 1.5 HP with touchscreen
- Total Horsepower: 1.5 THP
- WEF: 9.4
- Voltage: 115 / 208-230V
- Frequency: 50/60 Hz
- Full Load Amps: 12 at 115V, 6.4-5.9 at 208-230V
- Port Size (NPT): 1.5" x 1.5" or 2" x 2"
- Weight: 48 lbs
- Breaker: 15 amp
- Certifications: UL, NSF, Energy Star
Frequently Asked Questions
What is the difference between the 011067 and the 011068?
Both are the 1.5 HP IntelliFlo3 with a touchscreen. The 011068 additionally includes the I/O relay board, giving you two relays to switch other equipment. If you do not need those relays, the 011067 is the same pump for less.
Do I need the touchscreen if I have Pentair automation?
Not really. With IntelliCenter or EasyTouch you control the pump from the automation panel. The touchscreen earns its place when you have no automation, or want to change settings at the pad.
Can I add the relay board later?
Yes, using the Pentair 356365Z universal relay board kit. Compare that cost against stepping up to the 011068 before deciding.
Is the touchscreen weatherproof?
It is designed for outdoor equipment pad installation. As with any outdoor electronics, a shaded or sheltered position extends its life.
Will it fit my existing plumbing?
It takes 1.5" x 1.5" or 2" x 2" NPT ports with the union kit supplied. If you are replacing an older pump family, check your suction and discharge centrelines first.
Does it run on 115V?
Yes, this is a dual-voltage model rated for 115V or 208-230V. Wiring should be done by a qualified electrician for the voltage you choose.
Is 1.5 HP enough?
For most standard residential pools, yes. Spa jets, tall water features and in-floor cleaning systems call for the 3 HP models instead.