J&J Electronics | 23002 | ColorSplash XG-W RGB+White LED Pool Light, 120V 58W, 100 ft Cord
Couldn't load pickup availability
The J&J Electronics 23002 ColorSplash XG-W RGB+White LED Pool Light gives you five solid colors, seven light shows and a dedicated PureWhite mode in one fixture. This is the 120V, 58W model with a 100 ft cord, model number LPL-F2CW-120-100-P, and it fits most Hayward, Pentair and Jandy wet niches.
Key Features
- RGB plus PureWhite: five solid colors, seven light shows and a dedicated white circuit rated at 3,900 lumens, equivalent to a 500W incandescent.
- 120V line voltage: no transformer required.
- 100 ft cord for the run from the niche to the junction box.
- Universal niche fit: replaces most Hayward, Pentair and Jandy wet niches in gunite, vinyl and fiberglass pools.
- Wide angle, high output LEDs for wider coverage and stronger color saturation.
- Automation ready: works with Jandy and Pentair automation and syncs with ColorSplash XG, LXG and LXG-W fixtures and lamps.
- Built to last: 316 stainless steel rim, encapsulated housing and a tempered glass zero pixelation lens.
- 3 year manufacturer warranty handled through Hayward.
Specifications
- Part Number: 23002
- Model: LPL-F2CW-120-100-P
- UPC: 807154310241
- Type: ColorSplash XG-W RGB+White LED pool light fixture
- Voltage: 120V
- Wattage: 58W (500W incandescent equivalent)
- Peak Lumens: 3,900
- Color Temperature: 6500K cool white
- Cord Length: 100 ft
- Bezel: Polished stainless steel
- Brand: J&J Electronics (a Hayward company)
Frequently Asked Questions
Is the J&J 23002 a 12V or 120V light?
120V. It runs on line voltage with no transformer.
What other cord lengths are available?
The same 120V 58W fixture comes as the 23000 (30 ft), 23001 (50 ft), 23003 (150 ft), 23004 (200 ft) and 23005 (300 ft).
How is the 23002 different from the 23043?
The 23043 is the 39W F1CW fixture. The 23002 is the 58W F2CW, which puts out more light.
How long a cord do I need?
The cord has to reach from the niche to the junction box with enough slack to lift the fixture onto the deck for service. Cord length is fixed at the factory and cannot be extended underwater, so measure the full run before ordering.
Which niches does it fit?
It replaces most Hayward, Pentair and Jandy wet niches in gunite, vinyl and fiberglass pools. If you are not sure, send us the part number of your existing light before you order and we will confirm the fit.
Does it work with pool automation?
Yes. It operates with Jandy and Pentair automation systems. The system must be programmable to run Pentair IntelliBrite 5G LED color. Check your automation owner's manual.
Can I replace an incandescent pool light with this LED?
Yes, as long as the niche size, cord length and voltage match. LED fixtures draw far less power and last considerably longer than incandescent lamps.
Is professional installation required?
Installation by a licensed electrician or qualified pool professional is recommended and may be required to validate the warranty. Pool lighting must meet electrical code for bonding, grounding and GFCI protection. Always cut power at the breaker before servicing.
What is the warranty?
3 year manufacturer warranty, handled through Hayward. Keep your receipt and packaging until you have confirmed correct operation.
California Proposition 65 Warning: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.