How to Upgrade a Hayward ProLogic to OmniPL (HLXPROUPG Retrofit Kit)
A lot of pools built in the 2000s and early 2010s are still running a Hayward ProLogic panel. They were good systems in their day. But Hayward discontinued the ProLogic years ago, replacement boards keep getting more expensive, and there's no real app control. If your ProLogic is starting to act up, the Hayward HLXPROUPG retrofit kit converts that panel to a modern OmniPL system without ripping apart your whole equipment pad.
Can you upgrade a ProLogic to OmniPL without rewiring everything?
Yes. That's the whole point of the HLXPROUPG. It's a genuine Hayward retrofit kit designed to convert an existing ProLogic installation to OmniPL while reusing the wiring you already have in place.
A full automation replacement usually means pulling the old panel off the wall, disconnecting every pump, heater, light, and actuator, then landing all of it in a new enclosure. The retrofit approach skips most of that. Your existing connections stay where they are, and the new OmniPL electronics take over from the old ProLogic brain. For most installs that cuts the labor down by hours.
Why upgrade instead of fixing the ProLogic again?
Because at some point you're spending real money to keep an obsolete system alive. A replacement ProLogic main board (the GLX-PCB-PRO) runs close to a thousand dollars on its own. That's a big check to write for a system Hayward no longer makes.
Here's what you actually get by moving to OmniPL instead:
- Full smartphone control through the Omni app, from anywhere. The ProLogic never had this without add-on hardware.
- A current platform that Hayward actively supports, so parts and updates will be around for years.
- Support for modern equipment like variable speed pumps, LED color lighting, and current salt cells.
- A much friendlier interface. If you've ever scrolled through a ProLogic menu on that little LCD screen, you know what we mean.
What does the HLXPROUPG kit actually do?
The HLXPROUPG replaces the control side of your ProLogic with OmniPL electronics. The kit is built so the high voltage side of your setup carries over, which is exactly why the install is so much faster than a full panel swap.
One thing worth checking before you buy: confirm your current setup is a standard ProLogic installation. If your system has been heavily modified over the years, or you're not sure what model you have, send us a photo of the panel and we'll tell you if the HLXPROUPG is compatible with it.
Is the HLXPROUPG hard to install?
It's easier than a full automation replacement, but this is still line voltage work inside a live panel. If you're not comfortable shutting off breakers, verifying power is dead, and working around 240V wiring, hire a pool professional or an electrician. Most techs can do a retrofit like this in a single visit.
In general terms, the job looks like this:
- Kill power to the panel at the breaker and confirm it's off.
- Remove the old ProLogic control electronics.
- Mount the new OmniPL components from the kit.
- Reconnect equipment per the included instructions.
- Power up, run through the setup wizard, and connect the system to your home Wi-Fi.
Once it's on your network, you configure everything else from the app or the local display. Setup is menu driven and much simpler than the old ProLogic programming.
Repair or upgrade: how do you decide?
Quick rule of thumb. If your ProLogic is under ten years old and this is its first problem, a board swap can make sense. If the system is older than that, or you've already replaced a board once, put that money toward the HLXPROUPG instead.
Think about where the repair path leads. Spend near four figures on a new board today and you still own a discontinued system. The next failure, whether it's the display, a relay, or the board again, starts the same conversation over. The retrofit kit costs about twice what a board does, but you end up with a current OmniPL system instead of a patched old one.
The bottom line on the HLXPROUPG
If your Hayward ProLogic is not working the way it used to and you're staring down another expensive repair, the HLXPROUPG retrofit kit is usually the smarter play. You keep your existing wiring, skip most of the labor of a full replacement, and walk away with app control and a platform Hayward still stands behind. We keep the kit in stock and ship it fast.
Not sure this is the right part for your problem? Reach out and we will help you figure out exactly what you need before you spend money on the wrong thing.