{"product_id":"jandy-truclearps-truclear-xl-smart-power-pack-salt-chlorinator-control-for-pools-to-45-000-gallons-cell-sold-separately","title":"Jandy | TRUCLEARPS | TruClear XL Smart Power Pack | Salt Chlorinator Control for Pools to 45,000 Gallons, Cell Sold Separately","description":"\u003cp\u003eThe Jandy TRUCLEARPS is the TruClear XL Smart Power Pack, the control unit that runs a TruClear XL salt chlorination system. It converts incoming AC power into the low voltage DC the cell needs to make chlorine from dissolved salt, and it handles all the intelligence: output level, temperature compensation, flow detection, and cell authentication.\u003c\/p\u003e\n\n\u003cp\u003eThis is the power pack only. The TruClear XL cell is a separate purchase, and the two are not optional for each other. The XL cell will not operate on any other power pack, and this power pack is built for the XL cell. If your existing TruClear XL cell is fine and the controller failed, this is the part you need. If you are building a complete system, you need both.\u003c\/p\u003e\n\n\u003cp\u003eTwo features separate the XL from the older TruClear. Temperature compensation adjusts chlorine production based on water temperature, which protects cell life instead of running the plates hard in cold water where they wear faster. Dual gas traps handle flow detection, shutting down generation when circulation is insufficient rather than letting the cell run dry and build up gas.\u003c\/p\u003e\n\n\u003cp\u003eIt works at low flow rates, so it pairs properly with a variable speed pump running on a low overnight schedule. The housing is weather resistant for equipment pad mounting. Connect it to an AquaLink automation system over RS-485 and you get full control from the iAquaLink app.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSmart power pack for the TruClear XL salt chlorination system\u003c\/li\u003e\n  \u003cli\u003eSupports pools up to 45,000 gallons\u003c\/li\u003e\n  \u003cli\u003eTemperature compensation adjusts output to protect cell life\u003c\/li\u003e\n  \u003cli\u003eDual gas traps for flow detection and safe shutdown\u003c\/li\u003e\n  \u003cli\u003eCell authentication for genuine Jandy cells\u003c\/li\u003e\n  \u003cli\u003eWorks at low flow rates, fully compatible with variable speed pumps\u003c\/li\u003e\n  \u003cli\u003eRS-485 connection to any Jandy automation system\u003c\/li\u003e\n  \u003cli\u003eiAquaLink app control when paired with AquaLink automation\u003c\/li\u003e\n  \u003cli\u003eWeather resistant housing for equipment pad mounting\u003c\/li\u003e\n  \u003cli\u003eCompact footprint that fits most existing pad configurations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBrand: Jandy\u003c\/li\u003e\n  \u003cli\u003eManufacturer part number: TRUCLEARPS\u003c\/li\u003e\n  \u003cli\u003eManufacturer reference: WW000138\u003c\/li\u003e\n  \u003cli\u003eUPC: 052337095693\u003c\/li\u003e\n  \u003cli\u003eSeries: Jandy TruClear XL\u003c\/li\u003e\n  \u003cli\u003eType: salt chlorinator power pack\u003c\/li\u003e\n  \u003cli\u003ePool size maximum: 45,000 gallons\u003c\/li\u003e\n  \u003cli\u003eFor use with: TruClear XL chlorinator cell, sold separately\u003c\/li\u003e\n  \u003cli\u003eAutomation interface: RS-485\u003c\/li\u003e\n  \u003cli\u003eRequired salinity: 3,000 PPM\u003c\/li\u003e\n  \u003cli\u003eColor: gray and black\u003c\/li\u003e\n  \u003cli\u003eWeight: 11.5 lb\u003c\/li\u003e\n  \u003cli\u003eShipping dimensions: 16.63 x 10.63 x 9 in\u003c\/li\u003e\n  \u003cli\u003eCountry of manufacture: Mexico\u003c\/li\u003e\n  \u003cli\u003eApplication: residential and commercial inground pools\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\n\u003ch4\u003eDoes this include the salt cell?\u003c\/h4\u003e\n\u003cp\u003eNo. This is the power pack only. You need a TruClear XL cell to complete the system, and it is sold separately.\u003c\/p\u003e\n\n\u003ch4\u003eWill it work with my older TruClear cell?\u003c\/h4\u003e\n\u003cp\u003eNo. The Smart Power Pack is built for the TruClear XL cell. Older TruClear systems use the R0802200 power pack instead. Check which system you have before ordering.\u003c\/p\u003e\n\n\u003ch4\u003eCan I use a non-Jandy replacement cell with it?\u003c\/h4\u003e\n\u003cp\u003eNo. The XL system uses cell authentication, so aftermarket or clone cells will not run on it.\u003c\/p\u003e\n\n\u003ch4\u003eI have an AquaPure system. Can I switch to TruClear XL?\u003c\/h4\u003e\n\u003cp\u003eYes. A TruClear XL cell installs as a drop-in retrofit using the existing AquaPure union tailpieces, so the plumbing stays. You need this power pack and an XL cell.\u003c\/p\u003e\n\n\u003ch4\u003eWhat salt level does it need?\u003c\/h4\u003e\n\u003cp\u003e3,000 PPM. Test before startup and after any large water addition.\u003c\/p\u003e\n\n\u003ch4\u003eDoes it work with a variable speed pump?\u003c\/h4\u003e\n\u003cp\u003eYes. It operates at low flow rates, which is what makes it usable on a variable speed pump running slow overnight cycles.\u003c\/p\u003e\n\n\u003ch4\u003eCan I control it from my phone?\u003c\/h4\u003e\n\u003cp\u003eYes, when connected to an AquaLink automation system. It links over RS-485 and then runs through the iAquaLink app.\u003c\/p\u003e\n\n\u003ch4\u003eWhat does temperature compensation actually do?\u003c\/h4\u003e\n\u003cp\u003eIt adjusts chlorine production based on water temperature. Running a cell at full output in cold water shortens its life, so the power pack scales production instead.\u003c\/p\u003e\n\n\u003ch4\u003eCan I install this myself?\u003c\/h4\u003e\n\u003cp\u003eThis is a hard wired electrical component mounted at the equipment pad. Installation should be done by a licensed electrician or a qualified pool professional, and local electrical code applies. It should be wired on the same circuit as the filter pump so the cell cannot run in a no-flow condition.\u003c\/p\u003e\n","brand":"Jandy","offers":[{"title":"Default Title","offer_id":52817184883000,"sku":"TRUCLEARPS","price":1000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/6319\/9544\/files\/ASDFASDFSdafSDFsdf.png?v=1786991700","url":"https:\/\/appaetechpoolsupply.com\/products\/jandy-truclearps-truclear-xl-smart-power-pack-salt-chlorinator-control-for-pools-to-45-000-gallons-cell-sold-separately","provider":"AppaeTech Pool Supply","version":"1.0","type":"link"}