{"product_id":"jandy-r0688600-variable-speed-drive-2-2-2-7-hp-gen-ii-non-svrs","title":"Jandy | R0688600 | Variable Speed Drive 2.2 to 2.7 HP, Gen-II Non-SVRS, Drive Only, Fits VS PlusHP, VS FloPro and ePump","description":"\u003cp\u003eThe \u003cstrong\u003eJandy R0688600 Variable Speed Drive\u003c\/strong\u003e is the genuine OEM drive module for Gen-II permanent magnet variable speed pumps in the 2.2 to 2.7 HP class. The drive is the electronics package that sits on top of the motor. It converts single phase input power into the variable frequency output the motor runs on, and it holds the speed control logic, the schedule memory and the keypad.\u003c\/p\u003e\n\u003ch2\u003eDrive Only, Not a Motor\u003c\/h2\u003e\n\u003cp\u003eThis part replaces the drive electronics only. If the motor has seized or burned out, order the complete motor and drive assembly, R0562201, instead. The R0688600 is also Non-SVRS and Gen-II specific. It does not fit SVRS pump variants or earlier drive generations.\u003c\/p\u003e\n\u003ch2\u003eCompatible Pumps\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVS PlusHP:\u003c\/strong\u003e VSPHP270JEP, VSPHP270AUT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVS FloPro:\u003c\/strong\u003e VS-FHP2.0, VSFHP270JEP, VSFHP270AUT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eePump:\u003c\/strong\u003e VSSHP220AUT, VSSHP270AUT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhen You Need This Part\u003c\/h2\u003e\n\u003cp\u003eA failed drive is the most common reason a Jandy variable speed pump stops running while the motor is still good. Typical signs are a pump that will not power up, a blank or frozen keypad, fault codes that come back after a power cycle, or a pump that hums but never reaches speed. A new drive costs a fraction of a new pump.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Jandy OEM:\u003c\/strong\u003e correct firmware and connector layout for the Gen-II motor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestores full control:\u003c\/strong\u003e variable speed operation, onboard scheduling and keypad programming all come back with the new drive.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComponent level repair:\u003c\/strong\u003e replace the electronics, keep the pump.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCovers three pump families:\u003c\/strong\u003e VS PlusHP, VS FloPro and ePump in the 2.2 to 2.7 HP class.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGen-II permanent magnet design:\u003c\/strong\u003e matched to the ECM motor it drives.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e R0688600\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 052337071161\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Variable frequency drive module, drive only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower Class:\u003c\/strong\u003e 2.2 to 2.7 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneration:\u003c\/strong\u003e Gen-II\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSVRS:\u003c\/strong\u003e Non-SVRS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Motor and Drive Assembly:\u003c\/strong\u003e R0562201\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternate Part Numbers:\u003c\/strong\u003e TLD-101-7241, JDYR0688600, JNDR0688600\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Jandy \/ Zodiac\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eDoes this include the motor?\u003c\/h3\u003e\n\u003cp\u003eNo. This is the drive module only. If your motor has failed, order the complete motor and drive assembly R0562201.\u003c\/p\u003e\n\u003ch3\u003eHow do I tell a failed drive from a failed motor?\u003c\/h3\u003e\n\u003cp\u003eA drive fault usually shows as a dead or frozen display, a pump that will not start, or fault codes that survive a power cycle while the motor spins freely by hand. A failed motor more often tries to start and trips the breaker, or the shaft will not turn. A pool professional can confirm with a resistance check on the motor windings.\u003c\/p\u003e\n\u003ch3\u003eWill this fit an SVRS pump?\u003c\/h3\u003e\n\u003cp\u003eNo. SVRS pumps use a different drive and the two are not interchangeable.\u003c\/p\u003e\n\u003ch3\u003eWill it fit a Gen-I pump?\u003c\/h3\u003e\n\u003cp\u003eNo. This drive is Gen-II only. Check the generation on your pump or motor label before ordering.\u003c\/p\u003e\n\u003ch3\u003eDo my saved schedules carry over?\u003c\/h3\u003e\n\u003cp\u003eNo. Schedules and speed presets live in the drive, so a new drive arrives at factory defaults. Write down your speeds and run times before removing the old drive if the display still works.\u003c\/p\u003e\n\u003ch3\u003eHow do I confirm it fits my pump?\u003c\/h3\u003e\n\u003cp\u003eMatch the part number on the drive you are replacing, or check the parts list for your pump model. If your model is not listed on this page, send it to us before you order and we will confirm the fit.\u003c\/p\u003e\n\u003ch3\u003eWho should install it?\u003c\/h3\u003e\n\u003cp\u003eA qualified pool professional or licensed electrician. Cut power at the breaker before opening the drive, and remember that permanent magnet motors can generate voltage while the shaft is turning.\u003c\/p\u003e\n\u003ch3\u003eWhat is the warranty?\u003c\/h3\u003e\n\u003cp\u003eStandard Jandy manufacturer warranty. On some equipment coverage applies only when a licensed professional performs the installation. Keep your receipt and packaging until you have confirmed correct operation.\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eCalifornia Proposition 65 Warning: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/small\u003e\u003c\/p\u003e","brand":"Jandy","offers":[{"title":"Default Title","offer_id":52410484883768,"sku":"R0688600","price":949.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/6319\/9544\/files\/jandy-gen-ii-variable-frequency-motor-22-27-hp-r0688600-vita-pool-supply-7191673_1200x1200_81713917-d153-4a12-badd-fb6e9bf3b4f7.png?v=1790631917","url":"https:\/\/appaetechpoolsupply.com\/products\/jandy-r0688600-variable-speed-drive-2-2-2-7-hp-gen-ii-non-svrs","provider":"AppaeTech Pool Supply","version":"1.0","type":"link"}